What Are The Operating Precautions For The Guardrail Plate Forming Machine?

The development prospects of the guardrail plate forming machine industry are very promising, as it brings many benefits to the enterprise during use, so it is highly favored by customers. In order to make everyone more familiar with it, let's talk about the operating precautions of the guardrail plate forming machine? I hope to bring help to more people.

Nowadays, many people are still unfamiliar with some basic information about guardrail forming machines. Therefore, as manufacturers, it is necessary for us to briefly explain. In fact, this guardrail forming machine can greatly reduce labor costs, with high hardness and beautiful appearance. The cold bending line has a low failure rate, simple operation, and significant production benefits. Generally speaking, it is used in conjunction with a unboxing machine. Today's molding machines have gone through several generations of innovation, making their operations more intelligent. As a mechanical equipment, there are still many things to pay attention to during operation. For example, its preventive measures include circuits. It is recommended that everyone also pay attention to the cleanliness of the circuit board here, regularly clean the dust of the strong and weak current boxes, keep the boxes dry, and prevent moisture; Next, we need to check whether there is any oil leakage in various parts of the oil circuit and promptly handle it. The purpose of doing so is to prevent scratches on the piston rod and deterioration of the oil; Then, check if the transmission part of the guardrail plate forming machine is worn, check if each lubricating grease joint is blocked, and add lubricating grease.

Another important point is to replace the hydraulic oil once a year and clean the oil sludge in the oil tank. The water cooler should be cleaned in a timely manner to prevent oil temperature from rising and causing accelerated aging of the oil. Of course, safety is not a small matter. During the maintenance of the guardrail plate forming machine, it is necessary to check the normal operation of the circuit safety door switch, oil circuit pressure relief valve, mechanical safety stop, and machine warning light. When operating the protective fence forming machine, it is also important to strictly follow the operating procedures of the machine tool and wear labor protection equipment according to regulations. Before starting the machine, carefully check whether the motor, switch, circuit, and grounding are normal and secure, and check whether the operating components and buttons of the equipment are in the correct position. Check the overlap and firmness of the upper and lower molds; Check whether each positioning device meets the requirements for processing. Then everyone should pay attention to turning on the power, turning on the switch on the control panel, and then starting the oil pump. After starting the guardrail plate forming machine, idle for 5-10 minutes and move the upper slider 2-3 times throughout the entire stroke. If abnormal sounds or faults are found, the machine should be immediately shut down, the fault should be eliminated, and work can only be carried out after everything is normal. Or during work, under the unified command of one person, the operator should closely cooperate with the feeding and pressing personnel to ensure that the cooperating personnel are in reliable positions and issue bending signals.

After the above introduction, we have also gained a further understanding of the operating precautions for the guardrail plate forming machine. I won't feel unfamiliar when I see him again in the future, and I won't often encounter problems during use. Alright, that's all for today's content, and I believe it will bring more exciting knowledge points.